HP0-Y26 Exam

Quality and Value for the HP0-Y26 Exam

just4study Practice Exams for HP HP0-Y26 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your HP0-Y26 Exam

If you prepare for the exam using our just4study testing engine, we guarantee your success in the first attempt. If you do not pass the HP ASE HP0-Y26 exam (Building a Complete HP ProCurve Mobility Solution) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

HP HP0-Y26 Exams (in EXE format)

Our Exam HP0-Y26 Preparation Material provides you everything you will need to take your HP0-Y26 Exam. The HP0-Y26 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

HP0-Y26 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our HP HP0-Y26 Exam will provide you with exam questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the HP0-Y26 Exam:100% Guarantee to Pass Your HP ASE exam and get your HP ASE Certification.
　
　
Exam : HP HP0-Y26
Title : Building a Complete HP ProCurve Mobility Solution


1. You have verified that an HP ProCurve Switch 3500yl is correctly configured for PIM dense mode. The switch's IGMP table shows active hosts that are members of multicast group 239.193.22.22. The multicast is in progress, and all hosts are receiving the content. However, the multicast group does not appear in the switch's PIM route table.
What does this indicate about the 239.193.22.22 multicast group?
A. The switch is forwarding the multicast at Layer 2.
B. Other multicast routers are configured for PIM sparse.
C. The server and IGMP hosts are in different VLANs.
D. The switch is Querier for the group.
Answer: A

2. You must configure an HP ProCurve Switch 8212zl to be the Backup router for a VRID associated with VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A. It must be an address assigned to a multi-netted interface.
B. It must be an address that is not assigned to any interface on either router.
C. It must match the Backup router's address for the VLAN 10 interface.
D. It must match the Owner router's address for the VLAN 10 interface.
Answer: D

3. You must use the web management interface of an HP MSM710 Controller to perform a manual upgrade of the controller's software. In the management interface, which location must be specified as the source for the software file?
A. TFTP server
B. your workstation
C. controller auxilary port
D. your FTP server
Answer: B

4. You must configure an HP ProCurve Switch 8212zl to be the Owner of a VRID associated with VLAN 10. What must be true of the virtual IP address for the VRID?
A. It must be an address on a multi-netted interface.
B. It must match the router's address for the VLAN 10 interface.
C. It must match the address assigned to VLAN 10 on the Backup router.
D. It must use a classful network mask.
Answer: B

5. You have enabled Dynamic ARP Protection on an HP ProCurve 5406zl switch. When is it necessary to define IP-to-MAC address bindings?
A. when you must lock down the switch's IP addresses to its base MAC address
B. when you must specify clients connected to untrusted ports
C. when you must identify devices that do not use DHCP, but have a static IP address assigned
D. when you must protect uplink ports that connect to other switches that do not support Dynamic ARP Protection
E. when you must provide security to ports where different clients may connect at different times
Answer: C

http://www.Just4study.com The safer.easier way to get HP ASE Certification.