74-134 Exam

Quality and Value for the 74-134 Exam

just4study Practice Exams for Microsoft 74-134 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your 74-134 Exam

If you prepare for the exam using our just4study testing engine, we guarantee your success in the first attempt. If you do not pass the Microsoft Partner Competency 74-134 exam (Pre-Installing MS Products using the OEM Pre-Install Kit) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

Microsoft 74-134 Exams (in EXE format)

Our Exam 74-134 Preparation Material provides you everything you will need to take your 74-134 Exam. The 74-134 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

74-134 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Microsoft 74-134 Exam will provide you with exam questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 74-134 Exam:100% Guarantee to Pass Your Microsoft Partner Competency exam and get your Microsoft Partner Competency Certification.
　
　
Exam : Microsoft 74-134
Title : Pre-Installing MS Products using the OEM Pre-Install Kit


1. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 that is running the Dynamic Host Configuration Protocol (DHCP) service and is set up as a technician computer. You installed OPKTools from Microsoft Windows? XP Service Pack 2.
You want to set a static Internet Protocol (IP) address for the Microsoft Windows Preinstallation Environment on the computer that you are installing for your customer. During the preinstallation process, you receive the following error message: Cannot Authenticate to Server.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Edit the winbom.ini file in the WinPE.net section to include the Gateway= parameter.
B. Edit the winbom.ini file in the WinPE.net section to include the StartNet= parameter.
C. Edit the winbom.ini file in the WinPE.net section to include WinPEFirewall=On.
D. Edit the winbom.ini file in the WinPE.net section to include the IPConfig= parameter.
Answer: AD

2. You are a system builder.
Your network uses a Microsoft Windows Server? 2003 that is running the Dynamic Host Configuration Protocol (DHCP) service and is set up as a technician computer.
You installed OPKTools from Microsoft Windows? XP Service Pack 2. You run Setup Manager and create a configuration set to install a Microsoft Windows operating system.
You edit the winbom.ini file in the configuration set and copy the winbom.ini file to a floppy disk. You boot the master computer by using your Microsoft Windows Preinstallation Environment CD, and you insert the floppy disk with the winbom.ini file.
You get the following error message: Cannot Authenticate to the Server.
What should you do? (Each correct answer presents a complete solution. Choose two.)
A. Verify that the passwords used for connecting are the same in the configuration set and on the floppy disk.
B. Verify that the Gateway= parameter is included in the winbom.ini answer file.
C. Verify that the StartNet=yes parameter is included in the unattend.txt answer file.
D. Verify that the network interface card in the master computer is plugged in to the crossover cable.
Answer: AB

3. You are a system builder.
Your network is using a four-port router that is running the Dynamic Host Configuration Protocol (DHCP) service. Your technician computer runs Microsoft Windows? 2000 Professional and is connected to the four-port router.
You have installed a media reader card in a computer, and you use OPKTools to preinstall this computer over the network. In Audit mode you discover that the media card reader device has failed and that it is not enumerated in Device Manager.
You need to preinstall your computers with this card reader.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Add the DriverSigningPolicy=Ignore parameter in the Unattended section of the unattend.txt answer file to preinstall the unsigned driver.
B. Remove the incorrect driver that was installed.
C. Add the DriverSigningPolicy=Warn parameter in the Unattended section of the unattend.txt answer file.
D. Obtain an updated driver (if one exists) from the manufacturer.
E. Run sigverif.exe from a command prompt to verify that all the drivers are signed.
F. Add the DriverSigningPolicy=Block parameter in the Unattended section of the unattend.txt answer file.
Answer: AD

4. You are a system builder.
Your network is using a four-port router that is running Dynamic Host Configuration Protocol (DHCP). Your technician computer runs Microsoft Windows? 2000 Professional and is connected to the four-port router. You have created a configuration set by using OPKTools.
When you attempt the preinstallation on a new computer, you find that the hard drive is not formatted correctly. You open the winbom.ini answer file in the configuration set, and you see the following:
[Disk1.config]
Size1 = *
PartitionType1 = PRIMARY
FileSystem1 = NTFS
QuickFormat1 = YES
You need to perform an unattended preinstallation of Microsoft Windows on three new computers that you are shipping to customers.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Add Wipe Disk=Yes to the winbom.ini answer file.
B. Add SetActive1=Yes to the winbom.ini answer file.
C. Change Size1=* to Size1=10000 in the winbom.ini answer file.
D. Change QuickFormat1=YES to QuickFormat1=NO in the winbom.ini answer file.
Answer: AB

5. You are a system builder.
The company network is not functional, and there is no network access to the technician computer. You need to preinstall Microsoft Windows? operating systems on three computers. You have three copies of the Windows operating systems.
You have decided to use a winnt.sif file to perform a Windows CD-based preinstallation on these computers. You manually create a winnt.sif file and copy it to three floppy disks. You place a CD of each Windows operating system in the DVD drive of each computer. You start each computer.
When you see the initialization screen on each computer, you insert the floppy disk with the winnt.sif file on it into each computer. Two of the computers are preinstalled properly. The third computer, however, begins the preinstallation process but stops with the command prompt window open and the cursor at D:i386System32.
You need to preinstall the third computer.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Remove the CD from the drive, clean it, and begin the process again.
B. Check the Hardware Compatibility list to make sure that all hardware is compliant.
C. At the command prompt, type ipconfig /all to make sure that Transmission Control Protocol/Internet Protocol (TCP/IP) is bound to the adapter.
D. Remove the Microsoft Windows OEM Preinstallation Kit (OPK) CD from the DVD drive and place the Windows operating system CD into the DVD drive.
Answer: BD

http://www.Just4study.com The safer.easier way to get Microsoft Partner Competency Certification.