70-223 Exam

Quality and Value for the 70-223 Exam

just4study Practice Exams for Microsoft 70-223 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your 70-223 Exam

If you prepare for the exam using our just4study testing engine, we guarantee your success in the first attempt. If you do not pass the MCSE 70-223 exam (Configuring and Administering Microsoft Clustering Services by using Microsoft Windows 2000 Advanced) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

Microsoft 70-223 Exams (in EXE format)

Our Exam 70-223 Preparation Material provides you everything you will need to take your 70-223 Exam. The 70-223 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

70-223 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Microsoft 70-223 Exam will provide you with exam questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 70-223 Exam:100% Guarantee to Pass Your MCSE exam and get your MCSE Certification.
　
　
　
Exam : Microsoft 70-223
Title : INST.CONF.&ADM MS CLUST SERV USING MS WIN2K ADV SERVER


1. You are the administrator of two Windows 2000 Advanced Server computers. You need to configure these servers for use as cluster nodes.
Each server contains two network adapters. One network adapter in each server is designated for Client access only. The second network adapter in each server is designated for Internal cluster communications only. You plan to connect the second network in each server to a stand-alone hub,
You need to configure the IP addresses for the four network adapters. You want to minimize the chance of a failure in the network connectivity on both servers. What should you do?
A. Configure static IP addresses for the network adapters that are designated for Client access only.
Configure static IP addresses for the network adapters that are designated for Internal cluster communications only.
B. Configure dynamic IP addresses for the network adapters that are designated for Client access only.
Configure dynamic IP addresses for the network adapters that are designated for Internal cluster communications only.
C. Configure static IP addresses for the network adapters that are designated for Client access only.
Configure dynamic IP addresses for the network adapters that are designated for Internal cluster communications only.
D. Configure dynamic IP addresses for the network adapters that are designated for Client access only.
Configure static IP addresses for the network adapters that are designated for Internal cluster communications only.
Answer: A

2. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You need to install the Cluster service on the servers. You install a SCSI array controller in each server.
Next, you connect the array controllers to an external storage subsystem by using SCSI cables. You need to install at least one SCSI terminator in the external storage subsystem at one or more of the locations shown in the exhibit. (Click the Exhibit button.)
Where should you install a SCSI terminator or SCSI terminators? (Choose all that apply.)
A. Install a SCSI terminator at location 1.
B. Install a SCSI terminator at location 2.
C. Install a SCSI terminator at location 3.
D. Install a SCSI terminator at location 4.
E. Install a SCSI terminator at location 5.
Answer: AE

3. You are the cluster administrator for your company. You need to configure two Windows 2000 Advanced Server computers for use as cluster nodes. You need to implement fault-tolerance methods for the local storage. You also need to implement fault-tolerance methods for the external storage subsystem.
Each server contains two 9.3-GB hard disks. The external storage subsystem contains eight 10-GB hard disks. You need to ensure that the cluster can tolerate the failure of a single hard disk in either server and in the external storage subsystem.
Which two fault-tolerance methods should you use? (Choose two.)
A. Configure the hard disks in each server as Windows 2000 striped volumes.
B. Configure the hard disks in each server as Windows 2000 RAID 5 volumes.
C. Configure the hard disks in each server as Windows 2000 mirrored volumes.
D. Configure the hard disks in the external storage subsystem to use a hardware RAID 5 array.
E. Configure the hard disks in the external storage subsystem as Windows 2000 striped volumes.
F. Configure the hard disks in the external storage subsystem as Windows 2000 RAID 5 volumes.
Answer: CD

4. You are the administrator of two new computers. You need to configure the computers before installing Windows 2000 Advanced Server and the Cluster service. You install a new SCSI controller in each computer. You connect both controllers to an external disk array, which will serve as the cluster storage. The external disk array contains three hard disks. You start both servers and receive a BIOS error message on each server. The error message indicates that a device conflict has been detected on the SCSI bus. You need to correct this error. What should you do?
A. Change the SCSI ID to 0 on all three hard disks.
B. Change the SCSI ID on one of the SCSI controllers.
C. Add a SCSI bus terminator to the connector on the external disk array.
D. Add a SCSI bus terminator to the connectors on both SCSI controllers.
Answer: B

5. You are the administrator of a two-node Windows 2000 Advanced Server cluster. The cluster is configured as shown in the following diagram.
Adapter 1A and Adapter 2A are designated for Client access only. Adapter 1B and Adapter 2B are designated for Internal cluster communications only.
Which network components represent a single point of failure for internal cluster communications? (Choose all that apply.)
A. Adapter 1A
B. Adapter 1B
C. Adapter 2A
D. Adapter 2B
E. the crossover cable
F. the stand-alone hub
Answer: BDE

http://www.Just4study.com The safer.easier way to get MCSE Certification.